AY180
Machine Technical Date:
| Injection Unit | ||||
| Shot volume | cm3 |
289 |
366 |
452 |
| Shot weight (PS) | g |
266 |
337 |
415 |
| Oz |
9 |
11.9 |
15 |
|
| Screw diameter | mm |
40 |
45 |
50 |
| Injection pressure | Mpa |
234 |
185 |
150 |
| Injection rate | g/sec |
147 |
187 |
230 |
| Screw L/D ratio | L/D |
23.6 |
21 |
18.9 |
| Screw stroke | mm |
230 |
||
| Screw speed (stepless) | Rpm |
0 ~ 220 |
||
| Clamping Unit | ||||
| Clamping force | Ton |
180 |
||
| Opening stroke | mm |
450 |
||
| Platen size | mm |
780 x 730 |
||
| Space between tie bars | mm |
520 x 470 |
||
| Max. daylight | mm |
990 |
||
| Mold thickness (min-max) | mm |
180 ~ 540 |
||
| Hydraulic ejector stroke | mm |
150 |
||
| Hydraulic ejector force | Ton |
4.5 |
||
| Ejector pin | pcs |
5 |
||
| Hydraulic Unit | ||||
| Hydraulic system pressure | Mpa |
17.5 |
||
| Pump motor | kW |
18.5 |
||
| Servo driver power | kW |
18.5 |
||
| Heating capacity | kW |
12 |
||
| Number of temp control zones | pcs |
4 |
||
| General Data | ||||
| Oil tank capacity | L |
260 |
||
| Machine dimensions | m |
5.1 x 1.4 x 1.9 |
||
| Machine weight | Ton |
6.5 |
||
Ferrimino series Injection unit
- Swiveling type + Two layers Linear Guide Rails Injection Unit
- Swiveling designed injection unit helps change screw and barrel to be much easier
- Two layer linear guide rails helps shorten the length of injection unit support device, less deformation of the support device
Ferrimino series Clamping unit
- Wider range space between tie-bars, more molds size available and able to meet the needs for automatic mold installation system.
- Long and wider designed movable platen moving feet ensure stable mold open and close movement
- Ejector with adjustable stroke, meets more special ejector movements
Write your message here and send it to us











